ADS-TEC RAP/RAC1000 User Manual - Manual (Page 81)

IT Infrastructure RAP/RAC1000
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
81
8.2.4 ICS-S TATUS
The menu item ICS Status gives information on all neighbouring network structures. They
can be displayed in detail via Own Neighbour Table.
Note:
To activate the ICS function, the ICS setting must be activated under Configuration 
WLAN-1/2-Parameters  Channel
Note:
Further information on the mode of operation of the ICS is given in the WLAN
Configuration chapter.
8.2.5 HOST
Based on the data, how the packets have been received or sent, can be traced back
exactly. The display can be updated by using the Reload button.