ADS-TEC RAP/RAC1000 User Manual - Manual (Page 36)

IT Infrastructure RAP/RAC1000
36
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
6.5 W IRELESS N ETWORK C ONFIGURATION
Once again open up the properties panel located at:
Start> Control Panel > Network Connections
Right-click on your current wireless connection and then select Properties. Now click on
the tab Wireless Networks. In the Preferred Networks section on that tab, click the
button Add. Enter the following parameters:
Network Name SSID: (self-chosen non-default network name), or the default value ads
Network Authentication: Open
Data Encryption: Disabled
You may now close the dialogue windows by clicking “OK”.
6.6 E STABLISHING A W IRELESS N ETWORK C ONNECTION
In order to establish a wireless connection to the device, click on the WLAN icon you’re
your taskbar. A window listing all available networks will appear. Select the wireless
network with the appropriate SSID (self-chosen or default name ads) and click on
Connect. The following warning dialogue will pop up:
In order to connect to the WLAN you need to select “Connect Anyway”. The computer
will now establish a wireless connection to the device.
Note:
In case you are unable to establish a connection to the device, we recommend resetting
the device to factory default settings.
Note:
The current configuration does not use date encryption to secure wireless communication
channels. We recommend using data encryption. Please refer to the chapter
Configuration>Security>WLAN 1/2 for details on how to activate and configure
encryption.