It infrastructure rap/rac1000 – ADS-TEC RAP/RAC1000 User Manual User Manual
Page 56
Advertising
IT Infrastructure RAP/RAC1000
56
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
IP
V
4:
IPv4 requires setting a source and a target IP address. Furthermore, the respective subnet
mask for the source and target IP address is required.
The IPV4 protocol allows another comprehensive selection of filter criteria. It is possible to
filter Source IP address, Target IP address, IP protocol, Source and Target Port.
Note:
TCP/UDP ports can be indicated as port ranges, e.g. 80:88 for 80-88, :1024 (all
ports<1024), or 1024: (all ports larger than 1024)
The Internet Protocol offers the following options:
Advertising