Lenze I/O system 1000 System Manual - Manual (Page 233)

Product description
Power supply modules
I/O supply and electronic supply − EPM−S702
3
l
233 EDSIO1000 EN 7.0
Terminals
Module terminals, spring terminals 2
View Designation Explanation Terminal data
2 6
3 7
4 8
1 5 1 5
4 8
1 Not assigned
10 mm
0.08 ... 1.5 mm²
(AWG 28 ... 16)
2 I/O supply +24 V DC
3 I/O supply 0 V
4 Electronic supply +24 V DC
5 Not assigned
6 I/O supply +24 V DC
7 I/O supply 0 V
SLIO002 8 Electronic supply 0 V
)
Note!
ƒ Terminals 2 and 6 as well as 3 and 7 are bridged internally. Please note that
the max. permissible bridge current is 5 A.
ƒ Both the I/O supply and the electronic supply are protected against overload
internally by a fuse. When the fuses have been tripped, the main supply of
the bus coupler (EPM−S700) must be replaced (
¶ 726).