Lenze I/O system 1000 System Manual - Manual (Page 600)

DeviceNet communication
Parameterising technology modules
2 digital outputs with PWM functionality − EPM−S620
11
l
600 EDSIO1000 EN 7.0
11.8 Parameterising technology modules
11.8.1 2 digital outputs with PWM functionality − EPM−S620
Parameter data
Pos. in
string of
digits Name Description/value Lenze
1 PWM 1: period Set parameters here for the total time for pulse duration and
pulse pause. The time should be selected as a factor for the
20.83 ns basis.
Values below 25
ms are ignored. If the pulse duration is higher or
equal to the period, the DO output is set permanently.
Value range: 1200 ... 8388607 (25
ms ... approx. 175 ms)
1F40
h
2 PWM 2: Period 1F40
h