Lenze I/O system 1000 System Manual - Manual (Page 44)

Product description
Bus coupler modules
EtherCAT − EPM−S130
3
l
44 EDSIO1000 EN 7.0
3.5.3 EtherCAT − EPM−S130
The bus coupler module represents the interface between the process level (I/O level) and
the higher−level fieldbus. The control signals on the process level are transmitted by the I/O
compound modules via the internal backplane bus.
Features
ƒ EtherCAT bus coupler module for up to 64 peripheral modules
ƒ Ethernet−based fieldbus system with high real−time capability
ƒ Online project planning using Mater system
ƒ Extensive diagnostic functions
ƒ Integrated power supply unit for the internal voltage supply and the voltage supply
of the connected I/O compound modules
– Power supply unit supplied via an external DC voltage source
ƒ Connected to fieldbus via RJ45 socket 100BaseTX, 10BaseT
ƒ LEDs for status display
ƒ "Distributed Clock" and "Station Alias" are not supported