Lenze I/O system 1000 System Manual - Manual (Page 244)

Mechanical installation
Mounting
Mounting the busbar for the shield connection
5
l
244 EDSIO1000 EN 7.0
5.3.3 Mounting the busbar for the shield connection
SLIO201
Fig. 5−4 Mounting the busbar for the shield connection
EPM−Sxxx Bus coupler module, I/O compound module, power supply module
0 Busbar support for EPM−S900 shield connection (accessories)
1 Busbar 10 x 3 mm (available in selected stores)
2 Shield connection terminal (available in selected stores)
Insert the EPM−S900
0 busbar support into the base module as shown in the illustration.
Mount more supports for assistance in case of longer busbars.
5.3.4 Dismounting the bus coupler module, the I/O compound module, and the power supply
module
SLIO120
Fig. 5−5 Dismounting modules