Lenze E84DGFCT - Manual (Page 11)

EDS84DMOTECAT EN 2.1 - 11/2012
L
11
Communication manual 8400 motec EtherCAT®
Safety instructions
General safety and application notes
2 Safety instructions
2.1 General safety and application notes
 Lenze drive and automation components ...
– may only be used as directed.
 Application as directed
( 13)
– must never be commissioned if they display any signs of damage.
– must never be technically modified.
– must never be commissioned if they are not fully mounted.
– must never be operated without the required covers.
– can - depending on their degree of protection - have live, movable or rotating parts
during operation and after operation. Surfaces can be hot.
 For Lenze drive components ...
– use only the accessories approved.
– use only original spare parts from the manufacturer.
 Observe all specifications given in the attached and associated documentation.
– This is the precondition for safe and trouble-free operation and for achieving the
specified product features.

Features and variants
( 14)
– The procedural notes and circuit details described in this document are only
proposals. It is up to the user to check whether they can be adapted to the particular
applications. Lenze does not take any responsibility for the suitability of the
procedures and circuit proposals described.

Note!
Always observe the specified safety measures to avoid severe injury to persons
and damage to property!
Always keep this documentation to hand in the vicinity of the product during
operation.

Danger!
Disregarding the following basic safety measures may lead to severe personal
injury and damage to material assets.