Lenze E84DGFCT - Manual (Page 57)

EDS84DMOTECAT EN 2.1 - 11/2012
L
57
Communication manual 8400 motec EtherCAT®
Monitoring
Fault of the internal communication
3. Via standard device code C00002, execute the "11: Save all parameter sets" device
command to activate the changed parameter settings and to save it to the memory
module.
10.2 Fault of the internal communication
 The response to a communication error between the Communication Unit and the
Drive Unit can be set in code C01501 .
 The Communication Unit reports interrupted communication via an emergency
telegram to the master and changes to the "Safe-Operational" state.
 Error message " Lost connection to 8400 base device [0x01bc3100] "
( 63)
is issued.