Operational status quit [0x01bc8131, Message, 0x01bc8131 – Lenze E84DGFCT User Manual
Page 65: Communication manual 8400 motec ethercat
Advertising
![background image](/manuals/565820/65/background.png)
EDS84DMOTECAT EN 2.1 - 11/2012
L
65
Communication manual 8400 motec EtherCAT®
Error messages
Possible causes and remedies
Operational status quit [0x01bc8131]
Response (Lenze setting printed in bold)
Setting:
(; Adjustable response)
:
No response ; Error Fault ; Warning locked
Cause
Remedy
The EtherCAT data exchange was stopped in the
"Operational" state.
• See also chapter "
• Check cables and terminals.
• Connect network cable to EtherCAT terminals.
• The master has to reset the node to the "Operational"
status. (If required, check a pending emergency
message first).
Advertising