Lenze E84DGFCT User Manual
Page 42
Advertising
![background image](/manuals/565820/42/background.png)
Communication manual 8400 motec EtherCAT®
Process data transfer
Configuring the port interconnection of the process data objects (PDO)
42
L
EDS84DMOTECAT EN 2.1 - 11/2012
For some process data words, you can also assign signals to the individual bits via
the and
buttons.
Select the signals and then confirm the selection with OK.
The current interconnection is only displayed if the following has been set for the
control mode in code C00007 = 40: Network (MCI/CAN).
5. Via standard device code C00002, execute the "11: Save all parameter sets" device
command to activate the changed port interconnection and to save it to the
memory module.
Advertising