Lenze EMF2111IB - Manual (Page 50)

Data transfer
Device control
5
2111 INTERBUS fieldbus module
5.6
5.6.5
L
5.6-28 EDSIBS-1.0-06/2003
Status Meaning
NOT READY TO SWITCH ON The controller is still in the initialisation phase and not ready for operation.
It then automatically switches to the status READY TO SWITCH ON.
READY TO SWITCH ON The controller is inhibited and waits for the power stage to be charged. It then
automatically switches to the status ”SWITCHED ON“.
SWITCHED ON The controller is inhibited and waits for controller enable.
OPERATION ENABLED The controller is enabled. In this status, a pulse inhibit can be set automatically.
FAULT The controller is in the status ”FAULT“ (TRIP).
Show/Hide Bookmarks