Lenze EMF2111IB - Manual (Page 80)

Troubleshooting
DRIVECOM error codes
5
2111 INTERBUS fieldbus module
5.7
5.7.4
L
5.7-6 EDSIBS-1.0-06/2003
Lenze error
abbreviation
Meaning DRIVECOM error code [hex] Lenze error no.
CE0 61 8100 AIF time monitoring
CE1.4
CE11-14 62-65
122-125 8100 CAN time monitoring
CE5 66 8100 CAN time OUT
P16 166 8100 Sync telegram transmission error
240 8100 Free CAN obj. send memory overflow
241 8100 Free CAN obj. too many telegrams
received
P18 168 8200 Internal limitation
NMAX 200 8400 Nmax system speed
P04 154 8500 Negative position error
P05 155 8500 Positive position error
P06 156 8500 Home position not known
P07 157 8500 Absolute program set mode
P08 158 8500 Act. home position exceeding position
limits
P12 162 8500 Encoder area error
P13 163 8500 Angle overrun
P03,14,15 153/164-165 8611 Contouring error
P21 171 8611 RC contouring error
P01 151 8612 Limit-stop switch negative
P02 152 8612 Limit-stop switch positive
EEr 91 9000 External trip
) ) ) )
Note!
Only faults and errors caused by the controller can occur.
Please read the Operating Instructions for the controller.
Show/Hide Bookmarks