Lenze EMF2113IB - Manual (Page 20)

Persons responsible for safety
3
Safety information
3.2
L
3.2-1 EDSIBS-1.0-06/2003
3.2 Persons responsible for safety
An operator is any natural or legal person who uses the drive system or on behalf
of whom the drive system is used.
The operator and his safety personnel are obliged
l to ensure the compliance with all relevant regulations, instructions and
legislation.
l to ensure that only skilled personnel works on and with the 2102IB fieldbus
module.
l to ensure that the personnel has the Operating Instructions available for all
corresponding works.
l to ensure that all unqualified personnel are prohibited from working on and
with the drive system.
Qualified personnel are persons who - because of their education, experience,
instructions, and knowledge about corresponding standards and regulations,
rules for the prevention of accidents, and operating conditions - are authorized by
the person responsible for the safety of the plant to perform the required actions
and who are able to recognize potential hazards.
(Definition for qualified personnel to VDE 105 or IEC 364)
Operator
Qualified personnel
Show/Hide Bookmarks