Lenze EMF2113IB - Manual (Page 37)

Installation
Mechanical installation
7
Feldbus-Baugruppe 2113 INTERBUS
7.4
7.4.2
L
7.4-2 EDSIBS-1.0-06/2003
7.4.2 Mechanical installation
25 2102LEC014
l Plug the fieldbus module onto the basic device (here: 8200 vector).
l Fasten the fieldbus module with the fixing screw onto the basic device to
ensure a good PE connection.
) ) ) )
Note!
For the internal supply of the fieldbus module through the 8200
vector frequency inverter the interface of the jumper must be
adapted (see illustration above). Please observe the notes
^ 7.4-5 .
Show/Hide Bookmarks