Lenze EMF2113IB - Manual (Page 21)

General safety information
3
Safety information
3.3
L
3.3-1 EDSIBS-1.0-06/2003
3.3 General safety information
l These safety notes do not claim to be complete. In case of questions and
problems please contact your Lenze representative.
l At the time of delivery the communication module meets the state of the art
and ensures basically safe operation.
l The indications given in these Operating Instructions refer to the stated
hardware and software versions of the communication modules.
l The communication module is a source of danger if:
– unqualified personnel works on and with the communication module
– the communication module is used inappropriately.
l The specifications, processes, and circuitry described in these Operating
Instructions are for guidance only and must be adapted to your own
specific application.
l Ensure by appropriate measures that neither personal injury nor damage to
property may occur in the event of failure of the communication module.
l The drive system must only be operated when no faults occur.
l Retrofittings and modifications of the communication module are
prohibited. Lenze must be contacted in all cases.
l The communication module is electrical equipment intended for use in
industrial high-power plants. The communication module must be tightly
screwed to the corresponding controller during operation. In addition, all
measures described in the Operating Instructions of the controller used
must be taken. Example: Fasten covers to ensure protection against
contact.
Show/Hide Bookmarks