Lenze EMF2179IB - Manual (Page 16)

Safety instructions
Persons responsible for safety
2
2.1

2.1-1 EDSDEN EN 06/2004
2.1 Persons responsible for safety
An operator is any natural or legal person who uses the drive system or on
behalf of whom the drive system is used.
The operator or his safety personnel is obliged
ƒ to ensure the compliance with all relevant regulations, instructions and
legislation.
ƒ to ensure that only qualified personnel works on and with the drive
system.
ƒ to ensure that the personnel has the Operating Instructions available
for all work.
ƒ to ensure that all unqualified personnel are prohibited from working
on and with the drive system.
Qualified personnel are persons who - due to their education, experience,
instructions, and knowledge about relevant standards and regulations,
rules for the prevention of accidents, and operating conditions - are
authorised by the person responsible for the safety of the plant to perform
the required actions and who are able to recognise potential hazards.
(Definition for skilled personnel to VDE 105 or IEC 364)
Operator
Qualified personnel
Show/Hide Bookmarks