Lenze EMF2179IB - Manual (Page 29)

EMF2179IB communication module (DeviceNet)
General information
5
5.2

5.2-2 EDSDEN EN 02/2006
The internationally standardised CAN bus in particular stands out because
of
ƒ relatively short transmission times
ƒ low connection costs
These features have also lead to a wide spread of CAN products in other
industrial sectors.
DeviceNet
ƒ is based on the CAN technology.
ƒ allows communication between control systems as well as between
simple industrial devices like sensors (e.g. initiators) and actuators (e.g.
electromagnetically operated pneumatic valve), or also frequency
inverters or servo inverters.
The EMF2179IB communication module
ƒ is an ’ONLY-SERVER module of group 2.
ƒ is an attachable additional module for Lenze standard devices.
ƒ offers a simple connection possibility by pluggable terminal strips with
double screw connection, 5-pole.
ƒ optionally up to 12 process data words (depending on the standard
device)
ƒ access to all Lenze parameters
The front panel DIP switch provides a comfortable setting
ƒ of the baud rate for DeviceNet (125 kBit/s, 250 kBit/s and 500 kBit/s)
ƒ of the node address (max. 63 nodes)
ƒ of the software compatibility to the EMF2175IB communication
module
Features