Lenze EMF2179IB - Manual (Page 85)

EMF2179IB communication module (DeviceNet)
Index
5
5.10

5.10-2 EDSDEN EN 02/2006
O
Objects
- Acknowledge Handler Class, 5.7-12
- assembly class, 5.7-7
- Connection Class, 5.7-9
- DeviceNet Class, 5.7-6
- Identity class, 5.7-5
- manufacturer-specific class 101, 5.7-13
- Manufacturer-specific class 102, 5.7-14
- manufacturer-specific class 103, 5.7-15
- manufacturer-specific class 104, 5.7-15
- manufacturer-specific class 110 , 5.7-16
Operating conditions, 5.3-1
P
Parameter, C0142, 5.5-10
Plug connector for ext. supply, Connections, 5.4-9
Preparing the basic device for communication, 5.5-7
Processing time
- ECS, posi&shaft, 5.3-4
- ECS, speed&torque, 5.3-4
- in the drive PLC, 5.3-4
- in the ECS, application, 5.3-4
- in the servo PLC, 5.3-4
Processing times, 5.3-3
- 8200, 5.3-3
- 8200 vector, 5.3-3
- 821X, 5.3-3
- 822X, 5.3-3
- 824X, 5.3-3
Protective insulation, 5.3-1
Protocol data, 5.3-2
S
Setting of the address, 5.5-3
Setting of the device address, 5.5-3
Settings, DIP switch, 5.5-1
Signalling, 5.5-11
Software version, Type code, 5.2-1
Specification
- thick, 5.4-7
- thin, 5.4-8
Specification of the transmission cable, 5.4-6
Status display, 5.5-11
Supply voltage, internal, 5.4-11
T
Technical data, 5.3-1
Terminal data, 5.3-2
Terminals, data, 5.3-2
Transmission cable
- specification, 5.4-6
- thick, 5.4-7
- thin, 5.4-8
Troubleshooting, 5.8-1
Type code, 5.2-1
V
Validity of the Instructions, 5.2-1
Voltage supply, external, 5.4-9
W
Wiring to a host, 5.4-3