Lenze EMF2179IB - Manual (Page 48)

EMF2179IB communication module (DeviceNet)
Commissioning
Possible settings via DIP switch
5
5.5
5.5.1

5.5-1 EDSDEN EN 02/2006
5.5 Commissioning
5.5.1 Possible settings via DIP switch

Note!
The Lenze setting for all switches is OFF.
The device address and baud rate set via DIP switch will only be
active after a renewed mains connection.
Switch S9 is ineffective.
The following settings can be easily carried out via the front DIP switches of
the communication module:
ƒ Software compatibility of 2175 DeviceNet / 2179 communication
module with S10
ƒ Device address with S1 - S6
ƒ Baud rate with S7 / S8