Lenze EMF2179IB - Manual (Page 69)

EMF2179IB communication module (DeviceNet)
Lenze codes and DeviceNet objects
Implemented DeviceNet objects
5
5.7
5.7.2

5.7-10 EDSDEN EN 02/2006
Instance 2 (polled I/O data):
Attribute Service(s) Description Data type Value
1 GET state USINT Status of the object
2 GET instance_type USINT 1
3 GET transportClass_trigger BYTE 128/130 (80
hex
/82
hex
)
4 GET produced_connection_id UINT Send CAN identifier
5 GET consumed_connection_id UINT Reception of CAN
identifier
6 GET initial_comm_characteristics BYTE 1 (01
hex
)
7 GET produced_connection_size UINT Dependent on the
number of I/O data
words
8 GET consumed_connection_size UINT Dependent on the
number of I/O data
words
9 GET / SET expected_packet_rate UINT Connection-dependent
10/11 Not used No longer defined
12 GET watchdog_time-out_action USINT Defines time-outs
13 GET produced_connection_path_length UINT 4
14 GET produced_connection_path EPATH [20
hex
, 67
hex
, 24
hex
,
01]
15 GET consumed_connection_path_length UINT 4
16 GET consumed_connection_path EPATH [20
hex
, 68
hex
, 24
hex
,
01
hex
]
17 GET production_inhibit_time UINT 0