Rockwell Automation 440R MSR300 Modular Safety Control System - Manual (Page 30)

MSR300 Safety System Manual
Rockwell Automation
MSR300 Manual.doc Pg 30 of 85
LED indication of Output Group assignment:
The Input Module has three LEDs for indicating its assigned Output Group Module.
The Input Module has two additional LEDs that give diagnostic information as follows:
States Function LED Input 1 LED Input 2
1 Input 1 valid Continuous green ---
2 Input 1 invalid Continuous red ---
3 Input 1 switch faulty Flashes red ---
4 Input 2 valid --- Continuous green
5 Input 2 invalid --- Continuous red
6 Input 2 switch faulty --- Flashes red
7 Detected configuration
does not match that
stored in the
EEPROM
Input 1 LED flashes
red alternately with
Input 2 LED
Input 2 LED flashes
red alternately with
Input 1 LED
8 Redundant rotary
switches are not set
identically.
Input 1 LED flashes
red alternate with
Input 2 LED
Input 2 LED flashes
red alternate with
Input 1 LED
4.2.3 Connections For Input Functions
4.2.3.1 1-Channel
Emergency Stop
Switch setting: 1
Input 1 Input 2 Solid-state auxiliary
output: Input 1 Solid-state auxiliary
output: Input 2
S11-S12: N/C S11-S42: N/C S32 S62
Switches with forced driven contacts and additional failure exclusions
related e.g. to wiring and crossfaults required to achieve safety cat 4 in
this application (e.g. installation and wiring in IP54 cabinet)