Rockwell Automation 1794-IRT8XT FLEX I/O Thermocouple/RTD /Millivolt Input Module User Manual User Manual
Rockwell Automation Equipment
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1794-UM012C-EN-E Thermocouple, RTD, and Millivolt Input Modules User Manual
- Important User Information
- Summary of Changes
- Table of Contents
- Preface
- 1 – Overview of FLEX I/O and Your Thermocouple, RTD, and Millivolt Input Module
- 2 – Install Your FLEX I/O Input Module
- 3 – Configure Your FLEX I/O Module with RSLogix 5000 Software
- 4 – Read and Write Configuration Maps for the FLEX I/O Module
- 5 – Calibrate Your Module
- Overview
- When and How to Calibrate Your FLEX I/O Module
- Tools and Equipment
- Calibrate Your Input Module
- Calibration Setup
- Wiring Connections for Calibrating the Thermocouple and RTD Input Module
- Read and Write Words for Calibration
- EDT Calibration Command and Command Data Summary
- Offset Calibration
- Gain Calibration
- Current Source Calibration
- Cold Junction Calibration
- Channel Loop Compensation Calibration
- Chapter Summary
- Chapter 6
- 6 – Troubleshoot the Module
- A – Specifications
- B – Electronic Data Sheet (EDS) Files
- D – Program Your Module with PLC Family Processors
- E – Safety Approvals
- Index
- Back Cover