Rockwell Automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) User Manual - Manual (Page 113)

Publication 1761-UM006E-EN-P - August 2005
Connecting CompactLogix Controllers on Ethernet 8-21
the 1756-ENET, and the SLC 5/05 controller. The DF1 port is
displayed underneath the ENI/ENIW series B/C/D. Clicking on
the + sign left of the DF1 port should display the CompactLogix
controller.
Close RSWho. Minimize, but do not close, RSLinx.
Create MSG Programs for
the SLC 5/05 and the
ControlLogix Controllers You must create MSG ladder programs for the other two controllers on
Ethernet. The following is the MSG ladder program for the SLC 5/05
controller, developed with RSLogix 500. Following the ladder program
are four additional screens showing the two tabs for each MSG
Instruction. The first MSG illustrates a typical message to a
ControlLogix controller. The second MSG shows how to message to a
CompactLogix through a series A ENI. Before saving your program, be
sure to configure Channel 1 with its IP address, subnet mask and
disable BOOTP. Then, save your program.