Configure eni #1, Configure eni #1 -5 – Rockwell Automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) User Manual User Manual

Page 97

Advertising
background image

Publication 1761-UM006E-EN-P - August 2005

Connecting CompactLogix Controllers on Ethernet 8-5

Figure 8.2 Throttling Message Instructions

Configure ENI #1

The ENI/ENIW Configuration Utility, free software designed for
configuring the 1761-NET-ENI/1761-NET-ENIW, is available for
download from www.ab.com/micrologix.

First, configure the ENI/ENIW module connected to the computer.
This is ENI #1 per Figure 8.1. A 1761-CBL-PM02 serial cable is used to
connect a computer serial communication port to the RS-232 mini-DIN
serial port on the ENI/ENIW. The ENI/ENIW Configuration Utility is

TIP

If the CompactLogix controller is connected to a
series B/C/D ENI/ENIW and your computer has an
Ethernet network connection, you may skip directly
to Configure ENI #2 on page 8-7.

Advertising
This manual is related to the following products: