Rockwell Automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) User Manual - Manual (Page 23)

1 Publication 1761-UM006E-EN-P - August 2005
Chapter
2
Installation and Wiring
This chapter covers installation and wiring for the ENI/ENIW. It is
divided into the following sections:
• European Communities (EC) Directive Compliance
• Safety Considerations
• Mounting
• External Power Supply Wiring
• ENI/ENIW Port Identification
• Ethernet Connections
• RS-232 Port Connections
European Communities (EC)
Directive Compliance This product has the CE mark. It is approved for installation within the
European Union and EEA regions. It has been designed and tested to
meet the following directives.
EMC Directive
This product is tested to meet the Council Directive 89/336/EC
Electromagnetic Compatibility (EMC) by applying the following
standards, in whole or in part, documented in a technical construction
file:
• EN 50081-2 EMC — Generic Emission Standard, Part 2 —
Industrial Environment
• EN 50082-2 EMC — Generic Immunity Standard, Part 2 —
Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low
Voltage, by applying the safety requirements of EN 61131-2
Programmable Controllers, Part 2 - Equipment Requirements and