Rockwell Automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) User Manual - Manual (Page 51)

Publication 1761-UM006E-EN-P - August 2005
ENI/ENIW Configuration (Nodes 241 to 254) 4-11
14. The software notifies you that changes take effect when the port
is reopened. Click OK.
15. Click OK and then close the Com Port Redirector.
16. Reboot the PC, if requested.
Configure the ENI/ENIW
1. Open the ENI/ENIW Configuration Utility.
2. On the Utility Settings tab, select the appropriate COM port.
3. Select the ENI IP Addr tab. Click the (Load From) ENI button to
upload over Ethernet through the redirected com port.
The ENI/ENIW Configuration Utility may now be used for all
configuration operations over Ethernet using the Com Port Redirector.
The Redirector will automatically operate each time the configured
COM port is accessed.