Rockwell Automation 1756-XXXX ControlLogix Digital I/O Modules - Manual (Page 124)

124 Rockwell Automation Publication 1756-UM058G-EN-P - November 2012
Chapter 6 Install ControlLogix I/O Modules
Follow these steps to remove an RTB from the module.
1. Unlock the locking tab at the top of the module.
2. Open the RTB door by using the bottom tab.
3. Hold the spot marked PULL HERE and pull the RTB off the module.
IMPORTANT Do not wrap your fingers around the entire door. A shock hazard exists.
20855-M