Multiple output point densities, Electronic fusing, Multiple output point densities electronic fusing – Rockwell Automation 1756-XXXX ControlLogix Digital I/O Modules User Manual

Page 57

Advertising
background image

Rockwell Automation Publication 1756-UM058G-EN-P - November 2012

57

Common Module Features

Chapter 3

Multiple Output Point Densities

ControlLogix output modules use either 8-, 16-, or 32-point densities for greater
flexibility in your application. A point is the termination where a wire attaches to
the I/O module from a device. The I/O gets information from the device to this
designated point, thus signaling when activity occurs.

Electronic Fusing

Some digital outputs have internal electronic or mechanical fusing to prevent too
much current from flowing through the module. This feature protects the
module from electrical damage. Other modules require external fusing.

Modules that use electronic fusing are fused on either a per point basis or per
group basis to protect output points from the surge of too much current. If too
much current begins to flow through a point, the fuse is tripped and a point-level
fault is sent to the controller. A corresponding tag can be examined in the event of
a fault. For more information about fault tags, see

Appendix B

.

These modules use electronic fusing:

1756-OA8E

1756-OB8EI

1756-OA8D

1756-OB16D

1756-OB16E

1756-OV16E

1756-OV32E

1756-OB16IEF

1756-OB16IEFS

Refer to

Table 3

to determine what fuse to use in your application. If your module

does not support fusing, you can use a fused IFM to protect outputs. See
publication

1492-TD008

.

Table 3 - Recommended Fuses

Circuit Type

Cat. No.

Fusing on the module

Recommended Fuse

Fuse Supplier

AC

1756-OA8

(1)

None—Fused IFM can be used to protect outputs

(9)

5x20mm
6.3A Medium lag

SAN-O Industry Corp.
(SOC) p/n
MT 4-6.3A

1756-OA8D

(2)

(3)

Yes—Fused on a per point basis

Electronically fused

1756-OA8E

(2)

(3)

1756-OA16

(1)

(4)

(5)

Yes—Fused on a per group basis

5x20mm
3.15A Slo-Blow
1500A Interruption current

Littelfuse p/n
H2153.15

1756-OA16I

(1)

None—Fused IFM can be used to protect outputs

(9)

5x20mm
6.3A Medium lag

SOC p/n
MT 4-6.3A

1756-ON8

Advertising