Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual - Manual (Page 142)

142 Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
Chapter 10 Advanced Diagnostics and Hidden Web Pages
Reset Device
Follow these steps to reset the linking device.
1. To access the Reset page, type the following address (where the IP address
is the IP address of your linking device).
The Linking Device Reset Page appears.
2. On the Linking Device Reset Page, click Reset Device.
3. Click Submit.
A warning message appears.
4. Click Continue to reset the configuration.
If you click Cancel you will return to the Home page.