Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual - Manual (Page 61)

Rockwell Automation Publication 1757-UM012A-EN-P - July 2011 61
Create an RSFieldbus Software Project Chapter 3
Import a Template into a Project
Do these steps to use a template to create a bridge or device for a project.
1. Right-click the HSE Network icon and choose New>Bridge
from Template.
The Open dialog box appears.
2. Browse to the location of your templates.
3. Select the desired template and click Open.
A message dialog box appears to confirm the importing of the template.
4. Click OK.