Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual - Manual (Page 45)

Rockwell Automation Publication 1757-UM012A-EN-P - July 2011 45
Create an RSFieldbus Software Project Chapter 3
Create a New Control Module
Do these steps to add a control module to your project.
1. Right-click the Process Cell icon and choose Expand.
The Process Cell window appears.
2. Right-click the Process Cell icon and choose New Control Module.
The Control Module dialog box appears.
3. Type a tag name.
Our example is Control Module 1.
4. Click OK.
The new (Pressure) Control Module is added to the Project.