Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual User Manual
Page 87
Advertising
![background image](/manuals/579719/87/background.png)
Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
87
Create an RSLogix 5000 Software Project Chapter 5
Configure the Linking Device and Logix Block Properties
Use the following information to configure the linking device and Logix Block
module properties.
Configure Linking Device Properties
1.
In the Controller Organizer, right-click the linking device and
choose Properties.
The Module Properties dialog box appears.
In the General tab, you can rename the linking device, add a description,
set the IP address, and choose the type of electronic keying you prefer.
Advertising
This manual is related to the following products: