Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual - Manual (Page 63)

Rockwell Automation Publication 1757-UM012A-EN-P - July 2011 63
Create an RSFieldbus Software Project Chapter 3
3. Open a Strategy window and from the Tools menu, choose Strategy,
Import Strategy Template.
The Open dialog box appears.
4. Browse to the location of your templates.
5. Select the desired template and click Open.
The template and the Importing Template window appear.
6. Click OK.
The template is added to the strategy.
7. Attach the added blocks to their respective devices.
8. Save your work.
Use the HSE Network Setup
Tool See Appendix F for details on how to use the HSE Network Setup Tool to
activate multiple network cards or an inactive1757-FFLD linking device.
Add Device to the FFLDC
ControlNet Setup Tool Do these steps to define the CIP path of the 1757-FFLDC linking device to the
IDShell HSE.ini file so the RSFieldbus software can communicate with various
linking devices connected through the ControlNet network.
1. Configure the proper RSLinx Classic drivers to navigate to the
ControlNet network where your 1757-FFLDC linking device resides.
2. Choose Start>Programs>Rockwell Software>RSFieldbus>
FFLDC ControlNet Setup.
IMPORTANT • RSLinx Classic software must be installed to use the FFLDC
ControlNet Setup Tool.
• The linking device’s EDS file must be installed to use the
FFLDC ControlNet Setup Tool.