Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual - Manual (Page 49)

Rockwell Automation Publication 1757-UM012A-EN-P - July 2011 49
Create an RSFieldbus Software Project Chapter 3
Drag Blocks to a Strategy Window
You can drag blocks to the Strategy window after they have been added to the
control module or the Fieldbus (H1) window.
Do these steps to drag-and-drop blocks into a Strategy window.
1. In the Process Cell window, click a block and drag the icon into the
Strategy window.
2. Repeat step 1 and step 2 for all the blocks you want to link for the strategy.
3. Once all the blocks are in the Strategy window, drag-and-drop blocks
within the window to organize your strategy.
Create New Blocks in a Strategy Window
This option lets you create new blocks that do not already exist in the control
module.
1. With the Strategy window selected, click the template icon .
2. Click in the Strategy window area.
TIP If you drop the block too close to another block, the selected
block will not be drawn.
IMPORTANT From the Tools menu, choose Tool Boxes>Strategy to open the Strategy
toolbar. Strategy should be checked. If not, check it.
See page 21 for descriptions of the Strategy tools.