Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual - Manual (Page 31)

Rockwell Automation Publication 1757-UM012A-EN-P - July 2011 31
Create an RSFieldbus Software Project Chapter 3
2. In the Project window, right-click Fieldbus Networks and choose
Communication Settings.
The Communication Settings dialog box appears.
3. Verify the settings are the same as the dialog box shows, and click OK.
Create the Physical
Component Do these steps to add bridges and devices to your project.
Create a New Bridge (linking device)
This section defines the linking device as the bridge from HSE to your H1 field
devices. You can add a bridge in either the Project window or the HSE window,
this example shows the former.
1. To open an existing project, choose Open from the ProjectFile menu.
You also can click the Open icon .
2. In the Open dialog box, select your project by double-clicking it.