Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual - Manual (Page 43)

Rockwell Automation Publication 1757-UM012A-EN-P - July 2011 43
Create an RSFieldbus Software Project Chapter 3
2. Enter the tag in the Tag to Find box.
You also can click the tag in the Tags list.
The location of the tag appears in the Fieldbus Networks Location section.
3. Click OK.
The tag is highlighted in your configuration.
Create the Logical
Component This section describes how to create a logical component to your
fieldbus application.
Create a New Process Cell
Do these steps to create a process cell to administer function block logic.
1. In the Project window, right-click the Area 1 icon and choose
New Process Cell.