Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual User Manual
Page 89
Advertising
![background image](/manuals/579719/89/background.png)
Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
89
Create an RSLogix 5000 Software Project Chapter 5
5.
Return to the Module Properties dialog box and click the
Module Info tab.
In this tab, you can view the module’s identification information and
module’s status.
You must be online for module details to appear.
6.
On the Module Properties dialog box, click the Port Configuration tab.
In this tab, you can view or set the module’s port configuration. You must
be online for these details to appear.
If you make any changes in this tab, you must reset the module to activate
the changes.
Advertising
This manual is related to the following products: