Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual - Manual (Page 42)

42 Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
Chapter 3 Create an RSFieldbus Software Project
2. Choose the desired block and click OK.
The block is added to the physical component.
Detach a Block from a Device
Do these steps to remove a function block from a device.
1. In the Fieldbus (H1) window, right-click the desired block and choose
Detach Block.
2. Click Yes at the warning message.
The function block is removed from the device.
Tag Search
Do these steps to search and locate a tag in your configuration.
1. From the Search menu, choose Find.
The Find Tags dialog box appears.
Use the Device tab to search for a device or bridge tag or use the Block tab
to search for a block.
IMPORTANT If the block is attached to a control module, it remains attached to
the control module after being detached from a device. The block
can be attached to a different device.