Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual - Manual (Page 51)

Rockwell Automation Publication 1757-UM012A-EN-P - July 2011 51
Create an RSFieldbus Software Project Chapter 3
Link Blocks
You can link function blocks only in the Strategy window. Do these steps.
1. In the Strategy window, click the Link icon .
2. Click the first block.
The Output Parameter Selection dialog box appears.
You can mouse over the pins to read their descriptions at the bottom of the
dialog box.
3. Select a parameter, such as the OUT pin (as shown in the example).
The pin fills to show that it is selected.
4. Click OK.
A blue line is added to the block to represent the incomplete link.
5. Click the second block.
6. Select a parameter and click OK.
TIP Press Shift to draw lines at 45° and 135°.
Press Control to draw lines at 0° and 90°.