Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual - Manual (Page 56)

56 Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
Chapter 3 Create an RSFieldbus Software Project
Offline Characterization
This section explains how to configure function block parameters offline.
Do these steps.
1. In the Fieldbus (H1) window, right-click the desired block and choose
Off Line Characterization.
The Off Line Characterization dialog box appears.
2. Click to view all parameters.
3. Select a desired parameter and click Edit at the bottom of the dialog box.
4. Enter a value and click End Edit.