Rockwell Automation 2706-P42_P43_P44_P72_P74_P92_P94 InView Marquee Message Display User Manual - Manual (Page 108)

Publication 2706-UM016D-EN-P - March 2006
4-42 InView Protocol
for each of the fields shown above. Each of these are concatenated
together to make up the InView message.
InView Message Format
<SOH> Type Code Display Address
Description ASCII Hex Description ASCII Hex Description ASCII Hex
Start of Header ^A 01 All displays Z 5A Display
Address 00 3030
InView Message Format Continued
<STX> Command Code
Command Priority
Description ASCII Hex Description ASCII Hex Description ASCII Hex
Start of Text ^B 02 Write Text file A 41 Low 0 30
Write Special Function
E
(1) 45 Medium 1 31
High 2 32
(1) Refer to Trigger a Message on a Specific Display using Priority Messaging on page 6 for further explanation of the Special Function command
InView Message Format Continued
Command Code (Continued) Message Control
Message # <ESC> Display Position
Description ASCII Hex Description ASCII Hex Description ASCII Hex
0001 001 303031 Start of Mode Field ^[ 1B Middle (space) 20
Through Top “ 22
4000 FA0 464130 Bottom & 26
4095 FFF 464646 Fill 0 30