Rockwell Automation 2706-P42_P43_P44_P72_P74_P92_P94 InView Marquee Message Display User Manual - Manual (Page 111)

Publication 2706-UM016D-EN-P - March 2006
InView Protocol 4-45
Special Function Command
The Special Function Command is used to; Clear the Display Memory,
Set Message Size, Set Time and Date, Read Memory from a display on
the network, and set the serial address.
The following tables show the valid information to perform each on
the commands
InView Message Format Continued
Insert Variable - Alphanumeric
Variable Format Call Variable
Description ASCII HEX Description ASCII HEX
Alpha Length 1 ^]A301 1D41333031 Variable 1 ^PA00 10413030
.... ....
Alpha Length 128 ^]A380 1D41333830 Variable 100 ^PA63 10413633
InView Message Format Continued
Insert Bitmaps
Bitmaps
Description ASCII HEX
Bitmap 0 ^N0000 0E30303030
....
Bitmap 2047 ^N07FF 0E30374646
InView Message Format Continued
<EOT>
Description ASCII Hex
End of
Transmission ^D 04