Rockwell Automation 2706-P42_P43_P44_P72_P74_P92_P94 InView Marquee Message Display User Manual - Manual (Page 113)

Publication 2706-UM016D-EN-P - March 2006
InView Protocol 4-47
Set Time
Time can be set in either AM/PM format or 24 hour (military) format.
The following shows the valid values for this command
Special Function Command to Set Memory Size
<SOH> Type Code Display Address
Description ASCII Hex Description ASCII Hex Description ASCII Hex
Start of Header ^A 01 All displays Z 5A Display
Address 00 3030
Special Function Command to Set Memory Size Continued
<STX> Command Code
Command Function
Description ASCII Hex Description ASCII Hex Description ASCII Hex
Start of Text ^B 02 Write Special Function E 45 Set Message
Size a 61
Special Function Command to Set Memory Size Continued
Command Code (Continued) <EOT>
Description ASCII Hex Description ASCII Hex
Message Size (minimum) 50 Bytes 0032 30303332 End of Transmission ^D 04
Message Size (maximum) 450 Bytes 01C2 30314332
Special Function Command to Set Time and Time Format
<SOH> Type Code Display Address
Description ASCII Hex Description ASCII Hex Description ASCII Hex
Start of Header ^A 01 All displays Z 5A Display
Address 00 3030