Rockwell Automation 2706-P42_P43_P44_P72_P74_P92_P94 InView Marquee Message Display User Manual - Manual (Page 46)

Publication 2706-UM016D-EN-P - March 2006
2-8 InView System Connectivity
To set the communication rate using the messaging software:
1. Highlight the 2706-P9x display you wish to set the
communication rate.
2. Select Set Display Baud Rate under the Tools menu.
3. Choose the communication rate you wish to set the display at
and click on the Set button.
TIP
There is no confirmation that the command was sent.
The display must be power cycled to view the new
communication rate settings.