Rockwell Automation 2706-P42_P43_P44_P72_P74_P92_P94 InView Marquee Message Display User Manual - Manual (Page 115)

Publication 2706-UM016D-EN-P - March 2006
InView Protocol 4-49
Set Date
This command is used to set the date.
Format for displaying the date is shown under insert object on
page 4-35.
Special Function command to set Time and Date
<SOH> Type Code Display Address
Description ASCII Hex Description ASCII Hex Description ASCII Hex
Start of Header ^A 01 All displays Z 5A Display Address 00 3030
Special Function command to set Time and Date Continued
<STX> Command Code
Command Function
Description ASCII Hex Description ASCII Hex Description ASCII Hex
Start of Text ^B 02 Write Special Function E 45 Set Date ;
Special Function command to set Time and Date Continued
Command Code (Continued) <ETX
Set Date
Set Hour and Minutes HhMm ASCII Hex Description ASCII Hex
January 4, 2001 (Example) 010401 303130343031 End of Text ^C 03
December 5, 2002 (Example) 120502 313230353032
Special Function command to set Time and Date Continued
<STX> Command Code <ETX
Description ASCII Hex Description ASCII Hex Description ASCII Hex
Start of Text ^B 42 Set Time Format AM/PM ‘S 2753 End of Text ^C 03
Set Time Format 24Hr (Military) ‘M 274D