Rockwell Automation 2706-P42_P43_P44_P72_P74_P92_P94 InView Marquee Message Display User Manual - Manual (Page 45)

Publication 2706-UM016D-EN-P - March 2006
InView System Connectivity 2-7
The Communications Board Kits convert the six protocols to RS-232.
The board kit mounts on the four PEM spacers that are attached to the
internal mounting plate.
See publication 2706-IN015 for more information on how to install the
board kits.
Spacer Location
Compact Flash Card
This product uses a Type I Compact Flash Card for message file
storage.
Refer to publication 2706-IN017 for information on replacement and
installation of the Compact Flash Card.
Multiple Communication Rate Support
The 2706-P92C and 2706-P94C displays allow the user to select serial
communication rates of 9600, 19200,or 38400 bps. The communication
rates are both hardware (dip switches) and software selectable.
The communication rate of the display is set using the InView
messaging software, provided the communication rate dip switches
are all off.
TIP
For selecting the communication rate using the dip
switches, see the section entitled Dip Switch Settings
PEM Spacers