Rockwell Automation 2706-F11J_F11JC_F21J_F21JC DL50 INSTALLATION MANUAL - Manual (Page 103)

Chapter 8
Troubleshooting and Maintenance
8–8
5. Use a slotted screwdriver to remove end cap on the fuse holder.
Remove and install new fuse. The replacement fuse should be one of the
following types:
European: 2.5A Type GMA
U.S.A: 2.5A Type AGC
6. Carefully lift the front cover up to its closed position and use one of the
door latches to lock the cover in place. Tighten the screw securing the
latch.
7. Apply power and verify the initial power-up display as described in
Chapter 3.
8. Lock the rest of the door latches and tighten all of the screws.
Table 8.B lists the replacement parts that are available for the DL50.
Table 8.B
Replacement Parts List
Replacement Part Catalog Number
Power Supply W7712881002
Controller (Processor) Board W7712881103
Display Board, Red W7712881201
Power Input Fuse U.S.A: 2.5A Type AGC
European: 2.5A Type GMA
Only qualified service personnel should service the DL50. Replacement parts
can be ordered through your local Allen-Bradley distributor.
Replacement Parts List