Rockwell Automation 2706-F11J_F11JC_F21J_F21JC DL50 INSTALLATION MANUAL - Manual (Page 124)

Appendix H
EU Directive Compliance
H-2
The EN 60950 European Norme standard scope is defined as follows:
This standard is applicable to information technology equipment,
including electrical business equipment, and associated equipment with a
rated voltage not exceeding 600V.
This standard specifies requirements to insure the safety of the operator
and layman who may come in contact with the unit, and where
specifically stated for, service personnel.
This standard is intended to insure the safety of installed equipment,
whether it consists of a system of interconnected units, or independent
units, subject to installing, operating and maintaining the equipment in
the manner prescribed by the manufacturer.
Examples of equipment which is within the scope of this standard include:
visual display units, data terminal equipment, and data and text
processing equipment.
Equipment complying with the relevant requirements of this standard is
considered suitable for use with process control equipment, automatic test
equipment, and similar systems requiring information processing
facilities.
The products described in this manual are intended for use in an industrial
environment.
According to the EMC standards, the factor which determines whether an
apparatus is deemed to be “Industrial” or “Residential, Commercial, and
Light Industrial” is given in Clause 1 of EN 50081–2 as follows:
Apparatus covered by this standard is not intended for connection to a
public mains network, but is intended to be connected to a power network
supplied from a high– or medium–voltage transformer dedicated for the
supply of an installation feeding a manufacturing or similar plant.
This product is intended for the use solely in an industrial environment as
defined above. When installed in Europe, any other application is in
contravention of European Union Directives, and a breach of those laws.
Applicable Equipment
Intended Use
of the Product