Rockwell Automation 2706-F11J_F11JC_F21J_F21JC DL50 INSTALLATION MANUAL - Manual (Page 25)

Chapter 3
Configuring the DL50
3–8
Figure 3.4
DL50 Self-Test Sequence
SLAVE ADDR: XXXX
Slave Address
SUB-ADDR: XXXX
Self Test
Baud Rate
SELF TEST: PASS
Baud Rate: XXXXX
Protocol
Text Mode
Protocol: SIMPLEX
Mode: Small Text
Small Text, Large Text
Auto-Select
300, 1200, 9600, 19200
Protocol: DUPLEX
Checksum: ON
ON, OFF
Simplex
or
Duplex
Mode
Left Side LEDs
Illuminated ➀
Right Side LEDs
Illuminated ➀
Diagonal Line
Scrolls
Right to Left ➁
DL50 Type
Firmware Version DL50 F11JC TRI-COLOR
Firmware Ver: X.XX
F11J, F21J RED
F11JC, F21JC TRI-COLOR
➀ On tri-color versions of the DL50, the LEDs on the left and right sides are
momentarily illuminated in red, green and amber.
➁ On tri-color versions of the DL50, red, green, and amber diagonal lines
move simultaneously across the screen from right to left.